TB-4059 · REV C · Technical newsheet

Machine Vision & InspectionDevice profile

IDS GMSL2 Discovery Kit Pairs Jetson Orin NX with Synced Multi-Camera Vision

IDS pairs onsemi AR0233 Full HD cameras at 30 fps with NVIDIA Jetson Orin NX over single-cable GMSL2, lending developers a multi-camera embedded vision evaluation platform.

By Olivia Hart3 min read638 words

Features

  • IDS GMSL2 Discovery Kit pairs onsemi AR0233 camera modules (Full HD, 30 fps) with an NVIDIA Jetson Orin NX embedded PC
  • GMSL2 carries image data, control, synchronization and power over a single cable per camera
  • Camera data is exposed via the standard V4L2 interface; streams can be output over RTSP
  • Modules support HDR and LED Flicker Mitigation
  • The kit is available to companies on loan for evaluation and development projects
IDS Combines NVIDIA Jetson Platform with Synchronized Multi-Camera Vision
Device photoIDS Combines NVIDIA Jetson Platform with Synchronized Multi-Camera Vision — alandsmann / pixabay

A single coax-style cable carrying image data, control commands, synchronization signals and power is the central spec of the new IDS GMSL2 Discovery Kit, an evaluation platform from IDS Imaging Development Systems for embedded multi-camera vision. The kit combines intelligent camera modules with integrated image processing, GMSL2 (Gigabit Multimedia Serial Link) transmission, and an industrial-grade embedded PC built on the NVIDIA Jetson Orin NX platform.

Companies can borrow the Discovery Kit for evaluation and use it in their own development projects. The embedded PC carries matching GMSL connectors for direct attachment of the camera modules — no interface board sits between sensor and compute.

What does the camera module deliver?

Each intelligent module integrates an ISP (Image Signal Processor) and a SoC (System on Chip) alongside the image sensor. That sensor is the onsemi AR0233, a CMOS device that the modules run at Full HD resolution and 30 frames per second. The modules support High Dynamic Range (HDR) and LED Flicker Mitigation, two functions that matter when scenes mix bright and dark regions or when pulsed LED lighting would otherwise stripe the image.

Depending on the version, developers can integrate several camera modules into one system, IDS states. The company does not publish a maximum camera count in the announcement, so buyers evaluating large arrays should confirm the limit per kit configuration with the vendor.

How does the data reach the application?

IDS driver software exposes the camera data through V4L2 (Video for Linux 2), the standardized Linux video capture interface. Developers can start working immediately with their own Python and OpenCV applications and evaluate the cameras without additional integration effort, according to IDS. Live images can be output directly or integrated into existing systems as streams via RTSP (Real-Time Streaming Protocol).

The physical link is GMSL, a technology originally developed for automotive applications. Beyond carrying video, control and synchronization on one cable, GMSL lets multiple cameras run synchronously and be positioned flexibly, while bridging greater distances between camera modules and the embedded PC than short-reach board-level interfaces allow. For mobile platforms where cabling weight, robustness and space are constraints, that consolidation is the practical argument for the architecture.

The kit targets exactly those conditions: distributed cameras in mobile applications that need robust, long and space-saving cabling. IDS lists robotics systems, autonomous vehicles, smart farming, mobile machines, drones, aerospace systems and medical technology as candidate fields.

Why an evaluation kit rather than a product?

The engineering problem the kit addresses is synchronization and integration cost. Applications in which multiple cameras must transmit image data synchronously and with low latency to an embedded PC place special demands on data transmission, synchronization and integration, while cabling and integration effort should stay minimal. IDS positions the preconfigured platform as the way for developers to evaluate such system architectures before committing to a design.

"With the Discovery Kit, developers and original equipment manufacturers can evaluate modern embedded vision architectures in their own applications," said Kai Hartmann, Product Innovation Manager at IDS. "The foundations for customer-specific systems and subsequent series solutions emerge from such innovation projects. Our goal is to shorten the path from the initial idea to application-specific implementation."

What remains open?

The announcement gives no latency figures, no maximum cable length and no pricing, and IDS frames all performance claims at the level of architecture rather than measured results. Teams weighing the kit against GigE Vision or MIPI CSI-2 alternatives will want bench numbers — achievable cable runs, measured sync skew across modules, and Orin NX throughput with multiple 1080p30 streams — before treating the borrow-to-evaluate offer as a shortcut to a series design. The compliance question for automotive and medical integrators follows directly: does a GMSL2-plus-Jetson stack clear the environmental and functional-safety qualification path their end product requires?

via ids-imaging.us (Original)

Filed under

  • gmsl2
  • embedded-vision
  • multi-camera-synchronization
  • jetson-orin-nx
  • ids-camera-modules
Share this article:

More from Olivia Hart

Olivia Hart

Show full bio

Market editor covering technology and product news in Instruments, test and measurement at Testbench Report.

97 articles

Application notes

« Previous articleNext article »