TB-4810 · REV B · Technical newsheet

Sensors & InstrumentationDevice profile

IPercept raises $16.5M for component-level CNC diagnostics

IPercept’s $16.5M Series A funds US expansion and more CNC diagnostics built around micrometre-scale motion data from a patented device on moving components.

By Sophie Lindqvist5 min read980 words

Features

  • $16.5 million Series A round is co-led by Isogon Ventures and 2150.
  • IPercept reports deployments at facilities operated by more than 30 manufacturers.
  • Its patented device measures micrometre-scale movement without controller or customer IT-network connections.
  • The company estimates the global CNC installed base represents about $1 trillion in asset value.
  • The $16.5M round supports U.S. sales and deployment hires, service partnerships, team growth and new platform applications.
IPercept Raises $16.5M to Advance CNC Machine Diagnostics
Device photoIPercept Raises $16.5M to Advance CNC Machine Diagnostics — Beeki / pixabay

By Sophie Lindqvist

$16.5 million in Series A funding will accelerate IPercept’s deployment of patented condition-monitoring technology (continuous mechanical-health tracking) for CNC machine tools, expand its U.S. operations and fund new industrial-intelligence applications. The Swedish company, spun out of KTH Royal Institute of Technology in Stockholm, will also strengthen engineering and data-science teams and expand industrial service-partner relationships.

Isogon Ventures and 2150 co-led the round; Luminar Ventures, RunwayFBU, J12 Ventures and AI.Fund joined as existing investors. The first dedicated local U.S. sales and deployment hires will support a stronger American presence, with the United States identified as a key growth market.

What does the funding change?

Supplementary industrial-intelligence applications will extend the platform beyond component-condition data into additional maintenance and operational insights. IPercept also plans to add service-provider relationships as commercial routes to market and build out its engineering and data-science teams.

IPercept says its system runs at facilities operated by more than 30 manufacturers, including Airbus, Bosch, Hitachi Energy, Scania and Volvo. Industrial service providers Konecranes, Quant, DynaMate and MTT also use the technology.

Paco Riberas, General Partner at Isogon Ventures, said: “Industry is meant to run like a well-oiled machine, and unplanned CNC downtime is where that ideal breaks. IPercept is the most seamless, accurate answer the space has produced – and exactly what critical industries need.”

Rahul Parekh, Partner at 2150, added: “The next wave of AI will change how the physical world operates. IPercept is bringing intelligence directly to industrial equipment, helping manufacturers understand their equipment in real time, improve productivity and extend the life of critical assets.” Parekh continued: “That is exactly the kind of technology we want to back at 2150, and we’re excited to support Karoly and his team as they scale into the US.”

The funding changes commercial reach immediately, but the announcement still lacks a production-line performance record. Takeaway: Operators gain local deployment capacity, but they still need plant-level acceptance tests.

How does it measure a CNC machine?

Most CNC (computer numerical control) controllers manage axis movements and operating parameters, but they do not directly measure the physical condition of individual machine components. Conventional vibration-monitoring technologies were developed chiefly for applications such as pumps and motors, and IPercept argues that they may not suit the complex interactions inside a CNC machine.

IPercept’s measurement principle starts with actual component displacement (physical movement), which reveals mechanical behavior rather than commanded movement. IPercept mounts a single patented device on a moving component and uses it to measure micrometre-scale movement. The system converts that motion into component-level condition data.

The device needs no connection to the machine controller or customer IT network, and the design covers CNC brands, models and ages. That arrangement separates physical measurement from both controller data and conventional vibration monitoring.

Unlike approaches that need extensive historical operating data before establishing a pattern, the device measures physical behavior directly. IPercept says this avoids a lengthy startup period and gives production and maintenance teams component-level information about deterioration, wear rate and when intervention may be needed.

The announcement gives no displacement accuracy or resolution, bandwidth, sampling rate, calibration interval or test conditions for deployed units. Its “MRI for CNC machines” description—an internal view of mechanical condition—and the investor’s word “accurate” therefore remain qualitative claims, not published performance specifications.

The announcement supports the measurement method more strongly than production-grade accuracy. Takeaway: Buyers still need plant data before treating the diagnostics as authoritative.

What could earlier diagnosis change?

IPercept says manufacturers without the technology can spend as much as two days manually investigating a failure. The company also estimates average machine efficiency has remained broadly within 50–60% for decades, although the announcement provides no plant-level results to test that range.

The company estimates the global installed base, meaning CNC machines already in service, represents approximately $1 trillion in asset value. Those machines support automotive, aerospace, electronics, medical devices, machinery, energy and defence production, where component-level monitoring could target spindles, ball screws, linear guides and bearings before failure interrupts output.

By observing deterioration during operation, the system aims to let maintenance teams schedule work before a breakdown. That changes the service task from fault-finding after an interruption to component-level intervention while production continues, according to IPercept.

Financing addresses deployment, not proof of savings. Takeaway: Plant buyers must turn earlier component data into fewer unplanned stops before the economic case is proven.

What role did research play?

IPercept grew from research into CNC machine diagnostics and industrial dependability, meaning the long-term reliability of industrial assets, at KTH. Founder and CEO Karoly Szipka holds a PhD in CNC machine diagnostics from KTH, and co-founder Andreas Archenti is a chair professor in industrial dependability at the university.

Rather than applying general-purpose data science and artificial intelligence to conventional machine-monitoring data, the company says it modeled the specific mechanical behavior of CNC tools. Collaboration with the Advanced Manufacturing Research Centre, or AMRC, supported development and industrial engagement, while the platform combines direct motion measurement with component-level analytics.

That domain-specific approach underpins IPercept’s claim that it moves condition monitoring beyond machine-level indicators toward the condition of individual mechanical components. Buyers should ask whether its diagnostics distinguish early wear from normal machine behavior across different brands, models and ages.

The announcement gives no comparative benchmark showing how much that domain focus improves alert performance or false-alarm rates. Takeaway: Trust will depend on whether CNC-specific failure physics produces more useful alerts than generic machine monitoring.

The Series A buys reach, not proof of plant-level performance. The decision now sits with U.S. plant engineers: will they accept micrometre-scale motion monitoring as sufficient evidence for maintenance and production-quality decisions?

via amrc.co.uk (Original)

Filed under

  • ipercept
  • cnc-diagnostics
  • condition-monitoring
  • displacement-sensors
  • predictive-maintenance
Share this article:

More from Sophie Lindqvist

Sophie Lindqvist

Show full bio

News editor covering regulation, policy and their impact on Instruments, test and measurement at Testbench Report.

110 articles

Application notes

« Previous articleNext article »