TB-8690 · REV D · Technical newsheet

Metrology & CalibrationDevice profile

CAMIO 2026 R1 adds REVO 5-axis scanning support to CMM workflows

CAMIO 2026 R1 programs and runs REVO 5-axis scanning routines across supported CMMs, while I++/DME links mixed-brand machines over TCP/IP without proprietary modifications.

By Olivia Hart3 min read691 words

Features

  • CAMIO 2026 R1 adds direct REVO 5-axis routine programming and execution.
  • CAMIO supports three CMM architectures: bridge, horizontal-arm and gantry.
  • Four probe categories are listed: touch-trigger, analogue scanning, laser and REVO.
  • I++/DME uses standard TCP/IP between the CAMIO I++ client and a UCC controller's I++ server.
  • The announcement gives no accuracy, resolution, calibration-interval or cycle-time figures.
LK Metrology CAMIO 2026 with Renishaw REVO 5-Axis Integration
Device photoLK Metrology CAMIO 2026 with Renishaw REVO 5-Axis Integration — Pavlofox / pixabay

By Olivia Hart

LK Metrology's CAMIO 2026 R1 release adds support for programming and executing inspection routines on Renishaw's REVO 5-axis scanning probe system, extending CAMIO to synchronized five-axis motion on coordinate measuring machines. The announcement publishes no accuracy class, resolution, sampling rate, calibration interval or cycle-time gain, so its speed and accuracy claims remain unquantified.

What does CAMIO 2026 R1 add?

LK describes CAMIO 2026 R1 as the latest release of its proprietary software for CMM programming, analysis and reporting. Users can program and execute REVO routines directly in CAMIO, including sweep scanning and head-touches, within a common inspection environment.

The package manages bridge, horizontal-arm and gantry CMMs. Supported hardware includes conventional touch-trigger probes, analogue scanning probes, laser scanners and, with this release, REVO.

LK says CAMIO optimizes probe motion and measurement paths to “significantly reduce inspection time” while maintaining “exceptional measurement accuracy.” It also calls the interface intuitive and says offline programming lets users create, verify and optimize routines before CMM deployment, improving productivity and minimizing downtime.

Those benefits are vendor statements: the announcement gives no comparison baseline, test conditions or numerical result for either time reduction or accuracy. It also calls CAMIO one of industry's most versatile platforms, but supplies no metric that defines that position.

Which application workflows does it serve?

For manufacturers, the application extends from conventional touch inspection to multi-axis strategies that combine synchronized REVO motion with CAMIO's inspection capabilities for complex tasks. The announcement presents one software environment for several sensing methods and CMM mechanical architectures, without naming a specific part family or production sector.

Jonathan Rich, CAMIO Product Manager, said: “Our goal has always been to give manufacturers the freedom to choose the right metrology hardware for every application, without changing the way they program and inspect parts.”

Rich added: “Support for the REVO 5-axis system is another important step in delivering a truly open metrology platform that adapts to the user’s manufacturing environment. Our customers can now unlock the full capabilities of REVO 5-axis scanning probes, while continuing to benefit from CAMIO's familiar workflows and advanced inspection capabilities.”

Can one platform cover mixed-brand CMMs?

LK says plug-and-play interoperability lets manufacturers deploy a single inspection software platform across mixed-brand CMMs, multiple machines and separate sites, with consistent programming and inspection regardless of machine. The company links that consistency to simpler deployment, lower software lock-in and greater use of existing metrology assets.

The integration route is concrete: compatibility with any REVO-equipped CMM uses the industry-standard I++/DME client/server architecture. CAMIO operates as the I++ client over standard TCP/IP and communicates directly with the I++ server in the UCC controller.

For buyers, LK positions the integration boundary at that standard server rather than inside a proprietary programming layer. The company says this arrangement avoids proprietary software or hardware modifications, preserves existing metrology infrastructure and simplifies adding five-axis scanning to supported equipment.

Can LK Metrology supply a complete five-axis system?

LK says its position differs from other suppliers: some CMM OEMs do not offer a full range of machines, others do not offer REVO, and most major software houses cannot provide such inspection machines at all. It therefore offers the five-axis scanning software together with a broad range of REVO-enabled CMMs.

The stated customer benefit is a single source for high-speed, high-accuracy five-axis inspection, with less integration complexity and coordinated performance and support. As with the cycle-time and accuracy language elsewhere, the announcement provides neither numerical performance limits nor a named test case.

What should buyers validate before adoption?

Buyers should request application-specific REVO accuracy, uncertainty and inspection-time results, together with calibration interval, probe configuration and test conditions. They should also verify that each selected CMM exposes the required I++ server on its UCC controller over TCP/IP, and ask which I++/DME revision the interoperability statement covers.

Will buyers accept open I++/DME integration and a unified workflow, or require quantified application evidence before putting five-axis scanning routines into production?

via lkmetrology.com (Original)

Filed under

  • lk-metrology
  • camio
  • renishaw-revo
  • cmm-software
  • five-axis-scanning
Share this article:

More from Olivia Hart

Olivia Hart

Show full bio

Market editor covering technology and product news in Instruments, test and measurement at Testbench Report.

97 articles

Application notes

« Previous articleNext article »