TB-7835 · REV A · Technical newsheet
Test & MeasurementDevice profile
CRYSOUND packs 204.8kS/s DAQ into 1.25kg IP67 field unit
CRYSOUND's CRY5620 SonoDAQ Go packs eight 32-bit channels at 204.8kS/s into a 1.25kg fanless IP67 unit with battery power, microSD recording and onboard FFT analysis.
By Grace Kim4 min read870 words
Features
- CRYSOUND's CRY5620 SonoDAQ Go weighs 1.25kg (1.75kg with two modules) and is IP67-rated, fanless, and operable from −20°C to 50°C.
- Up to eight synchronized input channels at 32-bit resolution and 204.8kS/s sampling; top CRY5014 LMQ module reaches 170dB dynamic range.
- Standalone operation via 5-inch touchscreen and microSD recording (256GB included, 2TB optional); power from battery, DC or PoE.
- CRY5085 ADD output module delivers 10W into 8Ω and impedance measurement at ≤0.5% accuracy over 20Hz–20kHz.
- Launch extends the SonoDAQ platform unveiled at CRYSOUND's Global New Product Launch 2025 in Hangzhou; bundle pricing pending.

CRYSOUND's CRY5620 SonoDAQ Go puts eight synchronized 32-bit input channels, sampling at up to 204.8kS/s, into a fanless 1.25kg IP67-rated chassis. The portable recorder accepts two modules from the company's SonoDAQ ecosystem, runs on battery, DC or PoE, and records standalone to microSD — no tethered PC required during a measurement.
The launch extends the modular SonoDAQ platform that CRYSOUND unveiled at its Global New Product Launch 2025 event in Hangzhou, China. That event introduced the SonoDAQ hardware range alongside OpenTest, the company's next-generation software platform. CRYSOUND, founded in 1997 by Ruiying Cao — the "CRY" in the name comes from her initials, Cao Rui Ying — was one of China's first companies dedicated entirely to acoustic measurement. It now supplies more than 10,000 clients across 80 countries and reinvests 20% of annual revenue in R&D.
What does the portable unit share with the rack systems?
The existing chassis, the CRY5820 SonoDAQ Pro — with SonoDAQ Lite and SonoDAQ Ultra variants to follow — targets scalable systems that grow beyond 1,000 channels. The SonoDAQ Go carries the same acquisition technology into the field. The main unit weighs 1.25kg, or 1.75kg with two modules installed, with acquisition, display, storage and battery built in, so a configured test setup travels from lab bench to vehicle cabin or production line.
CRYSOUND states that acquisition accuracy comes from the installed input module, not the main unit. The same module and settings therefore deliver consistent performance in the portable unit and in the larger SonoDAQ systems. Multiple units synchronize via PTP or GPS, letting the Go act as a compact supplementary node in larger installations. The takeaway: one module family spans both bench-scale and 1,000-channel architectures.
Which input modules fit the two slots?
The slots accept three four-channel input options:
- CRY5010 IES — entry-level IEPE and voltage input; 32-bit resolution, 204.8kS/s maximum sampling, 120dB dynamic range, TEDS support.
- CRY5011 IED — for measurement microphones, accelerometers and voltage sources; adds a 160dB dynamic-range mode combining a 10Vp input range with a noise floor of ≤1.5μVrms over 20Hz–20kHz; selectable AC/DC coupling, differential or single-ended inputs, ±30ns channel-to-channel synchronization error.
- CRY5014 LMQ — universal input with four 7-pin LEMO connectors supporting 200V externally polarized microphones, IEPE, charge and voltage inputs; a quad-ADC architecture per channel delivers 32-bit resolution and up to 170dB dynamic range, sampling from 10S/s to 204.8kS/s, input amplitudes to 31.6Vp, with CIC self-check. CRYSOUND names it for NVH, acoustic and structural vibration testing.
Can it drive as well as measure?
Yes. Paired with an analog output module, the Go becomes a stimulus-response analyzer. The CRY5083 AOS provides four 32-bit DAC channels at up to 204.8kS/s — differential outputs to 20Vp or single-ended to 10Vp, channel synchronization error ≤100ns, and independent phase configuration for multichannel excitation, calibration and external amplifier drive.
The CRY5085 ADD offers two output channels at 48, 96 or 192kS/s, plus a selectable Class-D amplifier mode delivering 10W into 8Ω and signal outputs up to 30Vpk. Its integrated impedance measurement spans 4–600Ω at ≤0.5% accuracy over 20Hz–20kHz. Combined with an input module and a measurement microphone, that makes a portable loudspeaker and electroacoustic test station.
How does it operate away from the bench?
The 5-inch touchscreen handles configuration, signal monitoring, recording and review of analysis results on the unit itself. Onboard functions include FFT and octave analysis, sound level and sound power measurement, and vibration analysis with tachometer inputs; input and output EQ is planned for a future release.
Data records directly to microSD — 256GB included, 2TB optional. The IP67 housing operates from −20°C to 50°C, provides 1000V isolation between modules, and is completely fanless, so the hardware adds no fan noise beside a measurement microphone. Connectivity includes USB-C, Ethernet, CAN FD, Wi-Fi, two tachometer inputs and two CAN channels, all within a 213×183×50mm housing. On the PC side, the Go integrates with OpenTest for channel configuration, real-time waveforms, FFT, sweep testing and sound power analysis, and supports the openDAQ protocol with an SDK for test-bench automation.
CRYSOUND targets applications from on-site appliance noise testing — where onboard FFT reveals tonal peaks in air-conditioner outdoor units — to in-cabin automotive NVH recording on battery power, and electroacoustic R&D in anechoic chambers. A SonoDAQ Go bundle pairing the main unit with an input module, a sensor and a complimentary full-featured OpenTest license is upcoming, with pricing to be announced.
Can CRYSOUND take share from the incumbents?
The segment has long belonged to Brüel & Kjær, HEAD acoustics, Dewesoft and m+p international, where portable high-dynamic-range NVH acquisition typically means heavier chassis, external power and a permanently attached laptop. CRYSOUND is betting that a modular architecture shared with its rack systems, standalone recording and open software — plus proximity to China's manufacturing and EV supply chains — will carry its production-floor reputation into portable field measurement. Whether buyers accept those datasheet figures against incumbent platforms is the adoption question this launch now faces.
via audioxpress.com (Source)
Filed under
- data-acquisition
- acoustic-measurement
- nvh-testing
- signal-analysis
- portable-daq
More from Grace Kim
Show full bio
Correspondent covering companies, deals and strategy in Instruments, test and measurement at Testbench Report.
116 articles
Application notes
- China's Seichi Tech Grows Memory-Tester Orders While HBM Win Stays Unverified
- Emerson widens access to RF test systems with new NI PXI instruments
- Test Equipment Makers Vie for SK Hynix P&T7 Orders Up to 400 Billion Won
- SK hynix Adds 20,000 Wafers per Month of HBM4 Capacity
- Acromag QPCe7340 Puts Four VITA 93 QMC Sockets on a PCIe Carrier