TB-9312 · REV D · Technical newsheet

Sensors & InstrumentationDevice profile

Melexis MLX90901 brings 3-axis force sensing to humanoid fingertips

Melexis MLX90901 fingertip module measures 15 N normal and 4 N shear force at 10% accuracy, packing Tactaxis magnetic sensing into a complete mechatronic package for humanoid hands.

By Olivia Hart3 min read681 words

Features

  • MLX90901 measures normal forces up to 15 N and shear forces up to 4 N with 10% full-scale accuracy and 200 mN typical resolution.
  • The module resolves contact force on three axes — normal plus two shear directions — over I²C.
  • The launch follows four years of Tactaxis technology maturing from individual taxel demonstrations.
  • The DVK900901 evaluation kit is available now for benchmarking and three-axis force characterization.
  • The module integrates sensor, magnet, elastomer, mechanics, and electronics as Melexis' first mechatronic module.
Melexis Gives Humanoid Robots Sense of Touch with Its First Tactile Fingertip Module
Device photoMelexis Gives Humanoid Robots Sense of Touch with Its First Tactile Fingertip Module — TheDigitalArtist / pixabay

Melexis has specified its first tactile fingertip module, the MLX90901, at 15 N normal-force range, 4 N shear range, 10% full-scale accuracy, and 200 mN typical resolution — numbers that mark the transition of its magnetic Tactaxis sensing technology from research taxel to product. The module resolves contact force across three axes, capturing normal force together with shear in two directions, and communicates over I²C (a two-wire bus standard for short-range embedded links).

The launch culminates four years of maturing the Tactaxis principle. Melexis first demonstrated the biomimetic approach — sensing elements mimicking the skin's distributed touch receptors — through individual taxels, letting engineers evaluate the concept. Customer trials and application development supplied the system-level insight, and the MLX90901 is the result: a complete mechatronic module integrating sensor, magnet, elastomer, mechanical structure, and supporting electronics.

Why 3-axis force sensing changes the design decision

Most robots today still use simple grippers with no tactile feedback, or contact-force sensing limited to a single axis. The physics matters here: maintaining a stable grasp on an unfamiliar object, or manipulating it without damage, requires continuous knowledge of both the magnitude and the direction of contact forces. A single-axis sensor — measuring only force perpendicular to the sensing surface — cannot distinguish a slipping load from a tightening grip, because slip manifests as shear. Resolving normal plus two shear axes gives the controller a full picture of grasp stability, load movement, and fingertip-object interaction. That data feed is what closed-loop grasp control and so-called physical AI (machine-learning models trained on real contact data) depend on.

At the other end of the spectrum, advanced multisensory hands remain largely confined to research, where high costs, bespoke sensing architectures, and integration complexity block industrialization. Melexis positions the MLX90901 in the gap: no winning tactile technology has yet emerged that meets sensing performance, integration ease, and scalability simultaneously.

What the specification sheet says

The vendor's datasheet figures are:

  • Normal force range: 15 N
  • Shear force range: 4 N, two axes
  • Accuracy: 10% full-scale
  • Typical resolution: 200 mN
  • Interface: I²C, connecting directly to robotic hand controllers and embedded development platforms

Melexis states these figures enable capture of small force changes during realistic grasping and manipulation tasks; the company has not yet published independent third-party characterization, so benchmarking remains the developer's job — which the evaluation kit addresses.

Engineering the module as a system

Building on magnetic sensing (Melexis's core expertise), the Tactaxis approach pairs a magnetic sensor with a deformable elastomer and magnet. The interdependence of these elements is precisely what makes tactile sensing hard to industrialize: materials choice, assembly tolerances, and sensing performance all couple together. By engineering the fingertip as one module, Melexis removes that burden from hand developers.

"When we began developing Tactaxis, we could see research into tactile sensing accelerating and recognized how closely it aligned with Melexis' magnetic sensing expertise," said Julien Ghaye, Product Line Manager at Melexis. "With the MLX90901, we have gone beyond the sensing element to engineer Melexis' first complete mechatronic module. Taking responsibility for materials, mechanics, electronics, and integration demonstrates the depth of our commitment to humanoid robotics."

Ghaye added that the company is "playing the game to the end, combining research foresight with the industrialization experience needed to deliver something practical today and build towards the scale this market will require."

How to evaluate it

The DVK900901 evaluation kit, available now, lets hand manufacturers benchmark the MLX90901, characterize its three-axis force response, and prototype robotic hand designs on a standard platform. Robot OEMs can use it to generate the high-quality contact data needed to develop and validate closed-loop control. Melexis frames the MLX90901 as the first standard Tactaxis fingertip module and the foundation it will build on as performance requirements and production volumes advance.

The open question is adoption: will a single-vendor standard fingertip, at 10% full-scale accuracy and 200 mN resolution, satisfy humanoid OEMs' grasp-control requirements — or does the market still demand the higher-resolution, higher-cost architectures confined to labs today?

via azosensors.com (Source)

Filed under

  • 3-axis-force-sensing
  • tactile-sensing
  • humanoid-robotics
  • magnetic-sensing
  • robot-grasp-control
Share this article:

More from Olivia Hart

Olivia Hart

Show full bio

Market editor covering technology and product news in Instruments, test and measurement at Testbench Report.

97 articles

Application notes

« Previous articleNext article »