TB-7287 · REV C · Technical newsheet
Sensors & InstrumentationDevice profile
voestalpine Instrumented 54-Meter Test Track in Donawitz
voestalpine's 54-meter instrumented test track in Donawitz measures forces from the wheel-rail interface to the substructure; its project manager won the Bahnindustrie Award 2026.
By Nathan Brooks3 min read637 words
Features
- The Donawitz test track spans 54 meters and integrates sensor technology across the full track system, from wheel-rail interface to substructure.
- Timna Jakomijna Gschwandl, Project Manager Test Track Donawitz at voestalpine Rail Technology, received the Bahnindustrie Award 2026 for the facility.
- The track was rebuilt from an existing section and commissioned step by step after months of planning and coordination.
- Construction machinery, including a Dynamic Track Stabilizer (DGS), is tested on the track against specific track systems.
- Universities and industry representatives cooperated in developing the facility.

The test track at voestalpine's Donawitz plant site spans 54 meters and carries integrated sensor technology that records forces and component interactions across the entire track system, from the wheel-rail interface down to the substructure. Project Manager Timna Jakomijna Gschwandl of voestalpine Rail Technology, who guided the facility from planning through commissioning, received the Bahnindustrie Award 2026 for the development and implementation of the installation.
The facility replaces a gap that simulation and component testing cannot close. Gschwandl said: "Often, simulations or individual component tests are not enough. That is why we developed and built the test track. It allows us to investigate the entire system, from the wheel-rail interface all the way down to the substructure, and measure everything along the way."
What does the test track measure?
Every run over the 54-meter installation produces data on how individual superstructure components interact and what forces act within the system. The engineering rationale is systemic: a rail, sleeper, fastening or ballast layer characterized in isolation does not reveal load paths, settlement behavior or coupling effects that appear only when a complete system carries a real axle load. The rebuilt section of existing track embeds measurement technology directly in the superstructure, so each locomotive passage yields a full-system dataset rather than a set of separate component readings.
The commissioning process took months of planning, coordination and implementation. Gschwandl described the operational milestone: "When the first locomotive finally passed over the track and we saw the completed track with all the integrated sensor technology, that was a very special moment. Especially when you realize how much data can be collected and what the team has achieved during that time."
Which applications does the data serve?
The measured results feed directly into product development and maintenance planning at voestalpine Rail Technology. Gschwandl said: "The test track enables us to develop more robust track systems. We can investigate how to extend the service life of individual components, meaning a longer lifecycle, and create a more sustainable railway infrastructure."
The facility also hosts construction machinery trials. Railway construction machines operate on the track so that engineers can evaluate their performance with a specific track system. One cited example is a Dynamic Track Stabilizer (DGS), the machine used to consolidate ballast after tamping. Testing machinery against instrumented superstructure gives operators measured feedback on how stabilization equipment behaves with a given track design — a pairing normally invisible once machines leave the depot for revenue track.
The track was built in cooperation with universities and industry partners. Gschwandl characterized the range of use: "In a way, the test track is a playground for innovation, where a wide range of ideas and technologies can be tested."
Who built it, and what did the award jury recognize?
Gschwandl accompanied the project from the initial planning phase to commissioning and knows every meter of the facility. She entered engineering, she said, because "it allows you to discover new things and make a real impact on the world. You can bring innovations to life. And that's exactly what I can demonstrate with this project."
She credited the team's composition for the result: "A diverse team is a huge advantage because it brings together different perspectives. Everyone has different experiences, and those experiences can contribute to making a project better and more innovative."
The Bahnindustrie Award 2026 jury honored her contribution specifically for combining technical excellence, innovative strength and leadership, and cited the project's potential to contribute to more sustainable railway infrastructure.
The Donawitz facility raises a standards question for infrastructure buyers: with full-system force data now available from a 54-meter instrumented section, component qualification based on isolated laboratory tests and simulation alone may no longer satisfy operators who can demand measured evidence of lifecycle extension across the complete superstructure.
via railway-news.com (Source)
Filed under
- instrumented-test-track
- railway-testing
- track-sensors
- force-measurement
- rail-infrastructure
More from Nathan Brooks
Show full bio
Staff writer covering people, launches and day-to-day practice in Instruments, test and measurement at Testbench Report.
105 articles
Application notes
- voestalpine's zentrak Pushes Rail Freight Monitoring Forward
- Trackside Sensors Feed Control Room Decisions in Rail Monitoring Push
- Wireless Remote Condition Monitoring Advances on Unstable Railway Slopes
- voestalpine zentrak MDS Combines Seven Trackside Diagnostic Functions
- Automotive Test Equipment Market Forecast at $5.92B by 2033